PLANET WNAP-3000PE User Manual
Page 62
Advertising
8. Click
Add...
If you don't want to set any restrictions and a condition is required, select Day-
And-Time-Restrictions, and click Add...
9. Click
Permitted, then OK. Select Next.
10. Select Grant remote access permission. Click Next.
11. Click Edit Profile... and select the Authentication tab. Enable Extensible Authenti-
cation Protocol, and select Smart Card or other Certificate. Deselect other
authentication methods listed. Click OK.
12. Select No if you don't want to view the help for EAP. Click Finish.
57
Advertising