PLANET WNAP-1120 - Manual (Page 19)

Parameter Description
Mode Shows the current operation mode.
Band 2.4GHz (B): It forces the WNAP-1120 to operate in 802.11b only.
2.4GHz (G): It forces the WNAP-1120 to operate in 802.11g only.
2.4GHz (N): It forces the WNAP-1120 to operate in 802.11n only.
2.4GHz (B+G): It allows the WNAP-1120 to operate in 802.11b and 802.11g
simultaneously.
2.4GHz (B+G+N): It allows the WNAP-1120 to operate in 802.11b, 802.11g, and
802.11n simultaneously.
Channel Number Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
MAC Address 1~4 If you want to bridge multiple WNAP-1120 in this mode, you have to enter the MAC
addresses of other WNAP-1120 into the fields.
Set Security IF you want to enable security to protect your wireless connection. Please press
“Set Security” button and refer to section “3.2.8 Security setting for bridge mode” to
configure the detail settings.
After configuration complete, please click “Apply” button to save the configuration. Then you will see
a screen to prompt you the settings are saving successfully. You may press “Continue” for configure
other settings or “Apply” to restart WNAP-1120 with new configuration.
3.2.5 AP Bridge - WDS Mode
If you want WNAP-1120 to bridge to other WNAP-1120 and provide access for other wireless
clients at the same time, you have to set the WNAP-1120 to “AP Bridge - WDS”. Simply
speaking, “AP Bridge - WDS” function is the combination of “AP mode” and “AP Bridge-Point to
Multi-Point mode”.
19