Appendix b frequently ask question – PLANET WNAP-1120 User Manual
Page 47
Appendix B Frequently Ask Question
This chapter provides answer to problems usually encountered during the installation and operation of
the Wireless Network Access Point. Read the description below to solve your problems.
Q. Can I run an application from a remote computer over the wireless network?
A. This will depend on whether or not the application is designed to be used over a network. Consult the
application’s user guide to determine if it supports operation over a network.
Q. What is the WNAP-1120 IEEE 802.11n throughput?
A. The WNAP-1120 Wireless LAN is 300Mbps in the 11n 1T2R theory. According to the distance and real
wireless environment, you will get the different throughput. The real throughput is 70~80 Mbps in the
clear wireless lab environment.
Q. What IEEE 802.11 features are supported?
A. The product supports the following IEEE 802.11 functions:
‧ CSMA/CA plus Acknowledge protocol
‧ Multi-Channel Roaming
‧ Automatic Rate Selection
‧ RTS/CTS feature
‧ Fragmentation
‧ Power Management
Q. What is Infrastructure?
A. An integrated wireless and wired LAN is called an Infrastructure configuration. Infrastructure is
applicable to enterprise scale for wireless access to central database, or wireless application for
mobile workers.
Q. What is Roaming?
A. Roaming is the ability of a portable computer user to communicate continuously while moving freely
throughout an area greater than that covered by a single Wireless Network Access Point. Before using
the roaming function, the workstation must make sure that it is the same channel number with the
Wireless Network Access Point of dedicated coverage area.
Q. When WNAP-1120 works with WDS mode, can wireless connect to it?
A. Yes, WDS mode is work as the AP and Bridge at the same time. So the wireless client can access to
WDS mode WNAP-1120 without problem. When wireless client connect to the remote site via WDS
mode, the performance will be 50% then access to the connected WDS mode WNAP-1120. Just like
connect to AP via a repeater.
47