PLANET WNAP-1120 - Manual (Page 42)

3.10 System Time Zone
The time information is used for Log entries and Firewall settings. You can keep the default Time
Server address or set a new IP address for your router to synchronize its time.
Parameter Description
Set Time Zone
Select the time zone of the country you are currently in. The router will
set its time based on your selection.
Time Server Address
Remain it as default or, you can manually assign an IP address of the
Time Server. The information of Timer Server can be found in the
following URL link: http://www.eecis.udel.edu/~mills/ntp/servers.html or
http://www.ntp.org.
Enable Daylight Savings
The router can also take Daylight savings into account. To enable this
function, check/tick the “Enable Function” box and select which days this
function will work.
42