PLANET WNAP-7205 - Manual (Page 24)

User’s Manual of WNAP-7205
5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to
install the TCP/IP protocol, it may need the Microsoft Windows CD to complete the installation.
Close and go back to Network dialog box after the TCP/IP installation.
6. Select TCP/IP and click the properties button on the Network dialog box.
Figure 4-2
7. Select Specify an IP address and type in values as following example.
IP Address: 192.168.1.2 , any IP address within 192.168.1.2 to 192.168.1.254 is good to
connect the Wireless LAN Access Point.
IP Subnet Mask: 255.255.255.0
- 24 -