PLANET WNAP-7205 - Manual (Page 63)

User’s Manual of WNAP-7205
Step 3. Go to “Wireless Settings-> WDS”, fill in the MAC Address of the remote site.
Figure 5-29 WDS Configuration
1. To Setup the WDS Connection, the channel must be the same in both sites. You
should fix the channel from “AutoSelect” to a static one.
2. You must fill in the MAC Address by each other. For example, enter the MAC
Address of the remote site to the settings of local site; and enter the MAC Address
of the local site to the settings of remote site.
3. The Encryption Type must be the same in both sites if available.
- 63 -