PLANET WNAP-7205 - Manual (Page 39)

User’s Manual of WNAP-7205
c. PPPoE
d. L2TP
Object Description
L2TP Server IP Address Allow user to make a tunnel with remote site directly to secure the data
transmission among the connection. User can use embedded L2TP
client supported by this router to make a VPN connection.
If you select the L2TP support on WAN interface, fill in the IP address
for it.
User Name/Password
Enter the User Name and Password provided by your ISP. These fields
are case-sensitive.
Address Mode
 Static: To configure the IP address information by manually,
please fill in the related setting at below.
 Dynamic: The option allows the machine to get IP address
information automatically from DHCP server on WAN side.
IP Address
Fill in the IP address for WAN interface.
Subnet Mask
Fill in the subnet mask for WAN interface.
Default Gateway
Fill in the default gateway for WAN interface out going data packets.
Operation Mode
 Keep Alive: Keep the L2TP connection all the time. Please also
configure the Redial Period field.
 Manual: Let user connect the L2TP connection manually.
e. PPTP
Object Description
PPTP Server IP
Allow user to make a tunnel with remote site directly to secure the data
transmission among the connection. User can use embedded PPTP
Object Description
User Name/Password Enter the User Name and Password provided by your ISP. These fields
are case-sensitive.
Verify Password Fill in the password again for verification.
Operation Mode
Keep Alive: Keep the PPPoE connection all the time. Please also
configure the Redial Period field.
On Demand: Please configure the Idle Time field. When time is up, the
PPPoE connection will disconnect. The connection will re-connect
when any outgoing packet arise.
Manual: Let user connect the PPPoE connection manually.
- 39 -