PLANET WNAP-7205 - Manual (Page 64)

User’s Manual of WNAP-7205
5.4.6 Site Survey
This page is used to view or configure other APs near yours.
To connect with other AP by site survey, you need to configure the WNAP-7205 as “AP Client” mode in
the Basic Wireless Settings page as following.
Step 1. Go to “Wireless Settings-> Basic”, select the Wireless Moe to “AP Client”.
Figure 5-30 Basic Wireless Settings
Step 2. Go to “Wireless Settings->Site Survey” to scan the AP. Select the AP that you choose to
connect, and then click “Next”.
Figure 5-31 Site Survey - 1
- 64 -