PLANET ICA-H612 - Manual (Page 17)

Then according to the practical local power voltage to adjust the power switch, and connect the power
cord with adapter and power outlet.
Note
Use only the power adapter shipped with the unit to ensure correct functionality
STEP 15.
Connecting the network cable with switch.
STEP 16.
Set your computer’s IP address to 192.168.0.x, where x is a number between 1 to 253 (except 20 where
is being used for the camera by default). If you don’t know how to do this, please ask your network
administrator.
STEP 17.
Use web browser (Internet Explorer 6.0 or above) to connect to 192.168.0.20 (type this address in the
- 17 -