PLANET ICA-H612 - Manual (Page 68)

BLC
Users can choose to activate or disable the BLC function. Press the button “Set” to save the setting.
Sharpness
Increasing the sharpness level can make the image looked sharper; especially enhancing the object’s
edge. The Sharpness value is adjustable from 1 to 15. Press the button <Set> to confirm the setting.
ExpComp
Users can define the value of Exposure Compensation; the value ranges from 1 to 15.
Freeze
Freeze function allows to hold the image while the camera is moving between preset positions such as
in Preset mode and Sequence mode. Users can choose to activate or disable the function. Press the
button “Set” to save the setting.
Flip
Users can track an object continuously when it passes through under the Dome Camera with setting
Flip to Mechanical (M.E.) mode or Digital Flip (Image) mode.
NOTE: Flip setting is manual-controlled only. If a Preset Position or a point for other function
(ex. Sequence) is set in the position that can only be reached through FLIP motion, when
Flip function is turned off, the position cannot be reached anymore.
NOTE: To make the Dome Camera tilt between a specific range, such as -10° to +100° or
-10° ~ +190°, please go to the Tilt Range setting page to set the tilt angle range. Otherwise,
- 68 -