ProSoft Technology MVI69-EGD - Manual (Page 20)

MVI69-EGD ♦ CompactLogix or MicroLogix Platform Start Here
GE Ethernet Global Data Communication Module
Page 20 of 96 ProSoft Technology, Inc.
November 3, 2008
1.8 Connect your PC to the Module
With the module securely mounted, connect your PC to the Configuration/Debug
port using an RJ45-DB-9 Serial Adapter Cable and a Null Modem Cable.
1 Attach both cables as shown.
2 Insert the RJ45 cable connector into the Configuration/Debug port of the
module.
3 Attach the other end to the serial port on your PC or laptop.