ProSoft Technology PTQ-PDPMV1 User Manual
Page 122

Configuring the Processor with Concept 2.6
PTQ-PDPMV1 ♦ Quantum Platform
User Manual
PROFIBUS DP Master Network Interface Module for Quantum
Page 122 of 306
ProSoft Technology, Inc.
August 12, 2014
7 Select O
BJECTS
-FFB
S
ELECTION
. Click the DFB button and select the
SETOPMD function block. Click at the C
LOSE
button to confirm.
8 Insert the SETOPMD function block in the MAINPTQ section.
Associate the variables required for the input and output pins for this function
block.
IMPORTANT: The following pins must be associated to the variables previously imported. The
user cannot associate these pins to any other variables. This important step must be followed for
all function blocks.
PIN
Type
Default Variable Name
1
Data Type
StatOut
Input/output
PTQPDPMV1_Out_Stat
PTQ_OUT_STATUS
MailOut
Input/output
PTQPDPMV1_Out_Mail
PTQ_OUT_MAILBOX
StatIn
Input
PTQPDPMV1_In_Stat
PTQ_IN_STATUS
MailIn
Input
PTQPDPMV1_In_Mail
PTQ_IN_MAILBOX