ProSoft Technology PTQ-PDPMV1 - Manual (Page 292)

Reference PTQ-PDPMV1 ♦ Quantum Platform
User Manual PROFIBUS DP Master Network Interface Module for Quantum
Page 292 of 306 ProSoft Technology, Inc.
August 12, 2014
9.10 Frequently Asked Questions
9.10.1 How do I configure the module?
The PTQ-PDPMV1 requires a simple text-based configuration file to make it
operational.
9.10.2 Is a .MDC available for configuration of the module?
Yes. The CD-ROM that ships with the module should have a version for both
Concept 2.5 and 2.6 in the PTQ-PDPMV1 directory.
9.10.3 Does the module work in a remote rack?
The module is designed to be located in the chassis with the PLC and will not
operate in a remote chassis. If your application requires remote placement of the
communication device you should investigate other members of the ProSoft
Technology family such as the ProLinx gateway solutions.
9.10.4 Can I use the module in a hot backup system?
The PTQ-PDPMV1 module supports the 140CPU67160 Hot Standby processor.
Refer to Hot Standby Support (page 185) for setup and configuration instructions.