ProSoft Technology PTQ-PDPMV1 - Manual (Page 75)

PTQ-PDPMV1 ♦ Quantum Platform Configuring the Processor with Unity Pro
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 75 of 306
August 12, 2014
3 Click the T RANSFER button to download the project to the processor. As the
project is transferred, Unity Pro reports its process in a P ROGRESS dialog box,
with details appearing in a pane at the bottom of the window.
When the transfer is complete, place the processor in RUN mode. The processor
will start scanning your process logic application.
3.1.6 Verifying Communication between the Processor and the
Module
In this step, you will verify that the processor and the PTQ module are
communicating with each other over the backplane. The sample project includes
an animation table called MailBox Commands. When the processor and the PTQ
module are communicating, the values in this animation table are updated in real
time.
To verify communication between the processor and the module
1 Place the processor in RUN mode, if you have not already done so.
2 In the Unity Pro project browser pane, click
[+] to open the Animation Tables
tree, and then double-click M AIN T ABLE .
3 In the Main:Table, you will see all mailboxes, including Get Live List, Get
Diagnostics, and so on.
4 You must include {ModuleName}_StatIn, {ModuleName}_MailIn and
{ModuleName}_DataIn, using the same procedure for the Output
{ModuleName}_StatOut, {ModuleName}_MailOut and
{ModuleName}_DataOut.