ProSoft Technology PTQ-PDPMV1 - Manual (Page 161)

PTQ-PDPMV1 ♦ Quantum Platform Mailbox Messaging
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 161 of 306
August 12, 2014
Ident Number
Unique ID assigned by the PROFIBUS User Organization.
Extended Diagnostic Data
Slave user-specific data. Refer to the documentation for the actual slave for more
information.
6.2.3 Mailbox Message: Get Slave Configuration
This command reads the actual configuration (identifier bytes) of a specified
slave.
Note: The response data size depends on the actual slave implementation. Range 6 to 244.
Parameter Description
Command Initiator Application
Command Name GET SLAVE CONFIGURATION
Command Number 0500h
Fragmented No
Extended Header Data Fault information may be returned in the header of the response.
Command and Response Layout: Get Slave Configuration
Command Response
Message ID (ID) (ID)
Message information 0240h 0200h
Command 0500h 0500h Get Slave Configuration
Data size 0000h (Size of data) Number of identifier bytes
(n)
Frame count 0100h 0100h
Frame number 0100h 0100h
Offset high 0000h 0000h
Offset low 0000h 0000h
Extended word 1 Slave
Address
Slave
Address
Extended word 2 - -
Extended word 3 - -
Extended word 4 - -
Extended word 5 - Error Code 2 Error Code 1
Extended word 6 - Error Code 4 Error Code 3
Extended word 7 - Return Code
Extended word 8 - Fault Information
Identifier byte 1 Response data byte 1
Identifier byte 2 Response data byte 2
Identifier byte 3 Response data byte 3
... ...
Identifier byte n Response data byte n