ProSoft Technology PTQ-PDPMV1 - Manual (Page 169)

PTQ-PDPMV1 ♦ Quantum Platform Mailbox Messaging
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 169 of 306
August 12, 2014
Command and Response Layout: Acyclic Write
Command Response
Message ID (ID) (ID)
Message information 0240h 0200h
Command 2100h 2100h Acyclic Write
Data size (Size of data) (Size of data) Number of data bytes (n)
Frame count 0100h 0100h
Frame number 0100h 0100h
Offset high 0000h 0000h
Offset low 0000h 0000h
Extended word 1 Slot Slave Addr. Slot Slave Addr.
Extended word 2 Length Index Length Index
Extended word 3 - -
Extended word 4 - -
Extended word 5 - Error
Decode-
Extended word 6 - Error Code 2 Error Code 1
Extended word 7 - Extended Fault information
Extended word 8 - Fault Information
Message Data byte 1 Data 1 Data 1
Message Data byte 2 Data 2 Data 2
Message Data byte 3 Data 3 Data 3
... ... ...
Message Data byte n Data n Data n
Message Information
Refer to Message Information (page 180).
Slave Address
Station address of the slave responder.
Slot Number and Slot Index
Used in the slave to address the desired data block.
Length
This parameter specifies the number of bytes that have to be written. If the
destination data block size is less than requested, the response will contain an
error message. If the data block length is greater than or equal to the requested
length, the response contains the number of bytes that have been written. The
slave may answer with an error response if data access is not allowed.