ProSoft Technology 5228-DFNT-HART - Manual (Page 103)

ProLinx-HART ♦ ProLinx Gateway Index
HART Master with Analog I/O Driver Manual
ProSoft Technology, Inc. Page 103 of 104
October 13, 2011
Index
[
[Analog HART Card x] • 28
[HART PORT x COMMANDS] • 31
[HART PORT x] • 29
A
Agency Approvals and Certifications • 4
Allocation of Risks • 102
Auto-Poll Code • 30
Auto-Poll DB Address • 30
Auto-Poll Disabled Mode • 24
Auto-Poll Swap Float • 30
Auto-Polling • 21
B
Burst Mode • 21
Byte Count • 35
C
CHx High • 28
CHx Low • 28
COMMAND 00 - Read Unique Identifier • 42
COMMAND 01 - Read Primary Variable • 43
COMMAND 02 - Read Current And Percent
Of Range • 44
COMMAND 03 - Read Dynamic Variables •
45
COMMAND 06 - Write Polling Address • 46
COMMAND 108 - Write Burst Mode
Command Number • 82
COMMAND 109 - Burst Mode Control • 83
COMMAND 110 - Read All Dynamic
Variables • 84
COMMAND 12 - Read Message • 47
COMMAND 13 - Read Tag, Descriptor and
Date • 48
COMMAND 14 - Read PV Sensor Info • 49
COMMAND 15 - Read Output Information •
50
COMMAND 16 - Read Final Assembly
Number • 51
COMMAND 17 - Write Message • 52
COMMAND 18 - Write Tag, Descriptor and
Date • 53
COMMAND 19 - Write Final Assembly
Number • 54
COMMAND 33 - Read Transmitter Variables
• 55
COMMAND 34 - Write Damping Value • 56
COMMAND 35 - Write Range Values • 57
COMMAND 36 - Set Upper Range Value • 58
COMMAND 37 - Set Lower Range Value • 59
COMMAND 38 - Reset Configuration
Changed Flag • 60
COMMAND 39 - EEPROM Control • 61
COMMAND 40 - Enter Exit Fixed Current
Mode • 62
COMMAND 41 - Perform Transmitter Self
Test • 63
COMMAND 42 - Perform Master Reset • 64
COMMAND 43 - Set PV Zero • 65
COMMAND 44 - Write PV Units • 66
COMMAND 45 - Trim DAC Zero • 67
COMMAND 46 - Trim DAC Gain • 68
COMMAND 47 - Write Transfer Function • 69
COMMAND 48 - Read Additional Transmitter
Status • 70
COMMAND 49 - Write PV Sensor Serial
Number • 71
COMMAND 50 - Read Dynamic Variable
Assignments • 72
COMMAND 51 - Write Dynamic Variable
Assignments • 73
COMMAND 52 - Set Transmitter Variable
Zero • 74
COMMAND 53 - Write Transmitter Variable
Units • 75
COMMAND 54 - Read Transmitter Variable
Information • 76
COMMAND 55 - Write Transmitter Variable
Damping Value • 77
COMMAND 56 - Write Transmitter Variable
Sensor Serial Number • 78
COMMAND 57 - Read Unit Tag Descriptor
Date • 79
COMMAND 58 - Write Unit Tag Descriptor
Date • 80
COMMAND 59 - Write Number Of Response
Preambles • 81
Command Count • 30
Command List Overview • 31
Connecting Power to the Unit • 13
Connections for HART Analog Point-to-Point
Devices • 90
Contacting Technical Support • 95, 97
Controlling Law and Severability • 102
D
Database Register • 28
DB Address Status • 29
Delay Preset • 39
Disclaimer of all Other Warranties • 101
Disclaimer Regarding High Risk Activities •
100
Done DB Address • 35
Downloading a File from PC to the Module •
40
E
Enable • 32
Enable DB Address • 35