ProSoft Technology 5228-DFNT-HART - Manual (Page 83)

ProLinx-HART ♦ ProLinx Gateway Reference
HART Master with Analog I/O Driver Manual
ProSoft Technology, Inc. Page 83 of 104
October 13, 2011
COMMAND 109 - Burst Mode Control
Description
This command sets the HART device Burst Mode.
Write Parameters
Word High Byte Low Byte
0 Burst Mode Control Code Burst Mode Control Code
Floating Point Data Returned
NONE
Integer Data Returned
Word High Byte Low Byte
0 STATUS WORD
1 Burst Mode Control Code 0
1 = ON
0 = Off