ProSoft Technology 5228-DFNT-HART - Manual (Page 86)

Reference ProLinx-HART ♦ ProLinx Gateway
Driver Manual HART Master with Analog I/O
Page 86 of 104 ProSoft Technology, Inc.
October 13, 2011
Status Register Name Description
10701 Comm State Channel 0 communication state machine value (used
for debugging)
0 Startup
1 Idle
2 Transmit Pending
3 Transmit
4 Receive
5 Post Transmit
6 Idle, Waiting
10702 Device Status (bit
mapped)
Each bit in this word corresponds to a slave address on
the network starting at bit 1 for slave address 1. Bit 0 is
not used. If the bit is set, the slave is in error. If the bit
is clear (0), the slave is not in error.
10703 Device Poll List (bit
mapped)
Each bit in this word corresponds to a slave address on
the network starting at bit 1 for slave address 1. Bit 0 is
not used. If the bit is set, the slave is in the poll list. If
the bit is clear (0), the slave is not in the poll list.
10704 Device With Long
Address (bit map)
Each bit in this word corresponds to a slave address on
the network starting at bit 1 for slave address 1. Bit 0 is
not used. If the bit is set, the slave uses the long
address. If the bit is clear (0), the slave does not use
the long address.
10705 Current Command This field contains the index of the current command to
execute.
10706 Command Request
Count
This field contains the total number of request
messages issued on the port.
10707 Command Response
Count
This field contains the total number of response
messages received from devices on the network.
10708 Configuration Error
Word
Configuration error word (see HART Configuration
Error Word (page 89))
10709 Current Error Code Current error code for port
10710 Last Error Code Last error code reported for port
10711 No Valid Data
…
10799
Status Register Description
10800 Command List Status and Errors
…
10899