ProSoft Technology AN-X-AMX - Manual (Page 19)

AN-X-DCSNet2 Page 15
Select Utilities/Select An AN-X and enter the MAC Address and IP
address.
Click OK to accept the setting.
Select Utilities/AN-X IP Configuration.
Enter an IP Address. In this case we chose 192.168.0.10
Enter the same Subnet mask and Default gateway that you entered for the
computer. The default gateway address does not exist on the network
but AN-X requires that the field have a valid entry.
Click Finish to accept the settings.
Select Utilities/Restart AN-X to restart AN-X with the new parameters.
When the AN-X has restarted (SYS LED is solid green), select
Utilities/Locate All AN-X Modules
and confirm that the AN-X is found
with the new parameters.