ProSoft Technology AN-X-AMX - Manual (Page 38)

Page 34 AN-X-DCSNet2 November 2011
Viewing the Current Configuration
To view the configuration in an AN-X module, access the AN-X using
the web interface, and select Automation Network/View Configuration
Files.
Click on the link AN-X-DCSNet ControlLogix (Ethernet/IP)
Configuration File .
To save the configuration to a file on your computer, right click on the
link and save the target to a file.
Error Log
Errors that occur during configuration of scheduled data or during
operation of scheduled data or unscheduled messaging are logged in the
AN-X.
You can view the log using the AN-X web interface. Select Log
Files/ControlLogix Log
to view the log.
If the log overflows, AN-X closes the log file (enetip.0) and opens a
second log file (enetip.1) and continues to alternate between the two log
files as each one fills up. Use View All Logs to view both log files.
Exporting Aliases from AN-X
AN-X uses the Ethernet/IP configuration to create aliases that can be
imported into RSLogix 5000. Use these aliases in your RSLogix 5000
program to access the data on the AN-X.