Reconfiguring an an-x from an unknown state – ProSoft Technology AN-X-AMX User Manual
Page 20
Advertising
![background image](/files/866206/content/doc020.png)
Page
16
AN-X-DCSNet2
November 2011
Reconfiguring an AN-X from an Unknown State
It sometimes happens that an AN-X has been previously configured with
an IP address that causes it to be inaccessible on the current Ethernet
network. To reconfigure it to a known state, run the command
Configuration/AN-X IP Settings
to start the AN-X IP Configuration
Wizard and reconfigure the AN-X.
Advertising