ProSoft Technology AN-X-AMX - Manual (Page 58)

Page 54 AN-X-DCSNet2 November 2011
Log Files
AN-X maintains various logs to record diagnostic and error messages.
Use the Log Files menu in the web interface to view these logs.
System Error Log
The System Error log records errors that occur during AN-X operation.
This log is normally empty.
System Info Log
The System Info Log records informational messages during startup and
normal operation.
ControlLogix Log
The ControlLogix Log records messages from the application that is
responsible for scheduled communication with a ControlLogix processor.
These messages include normal startup messages, messages about
problems with the configuration file, and runtime errors such as timeouts.
If there are problems with scheduled connections to the AN-X or with
unscheduled messages to the AN-X, this log may provide further
information on the cause of the problem.
If the log overflows, AN-X closes the log file (enetip.0) and opens a
second log file (enetip.1.1) and continues to alternate between the two
log files as each one fills up. Use View All Logs to view both log files.
View All Logs
Use View All Logs to list and view all the AN-X logs. To view a log
file, double click on the file name.
Administration Menu
The Administration Menu is used to set the AN-X IP address and to view
and edit files on AN-X. The file edit function is password protected and
is used only for AN-X technical support.
Browse File System
If you are required by technical support to examine files on the AN-X,
select Administration/Browse File System.