ProSoft Technology AN-X-AMX - Manual (Page 8)

Page 4 AN-X-DCSNet2 November 2011
To exchange scheduled data with a ControlLogix processor over
Ethernet requires:
• version 12 or above of RSLogix 5000
• version 12 or above of the ControlLogix firmware
• 100 Mbit/second Ethernet network and hardware (ENBT)
Modes of Operation
There are three AN-X modes of operation:
• Boot mode. The AN-X is running its low level startup firmware.
• Configuration mode. This is the mode when you are updating the
firmware in the AN-X.
• Production mode. This is the normal runtime mode of operation.