ProSoft Technology AN-X-AMX - Manual (Page 53)

AN-X-DCSNet2 Page 49
AN-X-DCSNet can be used as a DCS master or slave. Check Master or
Slave to select which one you want.
If the AN-X-DCSNet is a DCS slave, enter the Drop Number and Drop
Depth. These entries are ignored if the AN-X is a DCS master.
The default AN-X configuration is DCS slave, drop 55, depth 1.
Click the SUBMIT button to send the values to AN-X.
If you are using ControlLogix Support, check the logs since the new
DCS parameters may be incompatible with the current configuration.