Epson WorkForce DS-6500 Document Scanner - Manual (Page 68)

68
4 Error light
Light status Condition/solution
Ready light is on Ready to scan
Ready light is flashing Initializing or scanning
Ready and Error lights are flashing Updating firmware
Error light is on An error has occurred. Turn the scanner off and then
back on again. If the error continues, contact Epson for
support.
Error light is flashing The firmware update has failed and the scanner is in
recovery mode. Try updating the firmware again. If the
error continues, contact Epson for support.
Wake Up/Sleep light is on The scanner is in sleep mode; press the Wake
Up/Sleep button to wake it up
All lights are off The scanner is turned off
Parent topic: Solving Problems
Related references
Where to Get Help
Solving Scanning Problems
Check these solutions if you have problems scanning with your product.
Scanner Does Not Turn On or Turns Off Unexpectedly
Start Button Does Not Work as Expected
Scanning Software Does Not Operate Correctly
Cannot Start Epson Scan 2
Scanning is Slow
Parent topic: Solving Problems