Epson PowerLite X49 3600-Lumen XGA 3LCD Projector - Manual (Page 108)

108
Note: If you are projecting from a computer and parts of the image are cut off, set the Resolution setting
to Wide or Normal in the Signal menu.
Parent topic: Image Aspect Ratio
Related references
Input Signal Settings - Signal Menu
Available Image Aspect Ratios
You can select the following image aspect ratios, depending on the input signal from your image source.
Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect
ratio and resolution of your input signal.
PowerLite W49/119W/982W/992F/1288
Aspect ratio setting Description
Auto Automatically sets the aspect ratio according to the input signal and
the
Resolution setting.
Normal Displays images using the full projection area and maintains the
aspect ratio of the image.
16:9
(PowerLite W49/119W/982W)
Converts the aspect ratio of the image to 16:9.
Full Displays images using the full width of the projection area, but does
not maintain the aspect ratio.
Zoom Displays images using the full width of the projection area and
maintains the aspect ratio of the image.
Native Displays images as is (aspect ratio and resolution are maintained).
PowerLite E20/X49/118
Aspect ratio setting Description
Auto Automatically sets the aspect ratio according to the input signal and
the
Resolution setting.