Epson PowerLite X49 3600-Lumen XGA 3LCD Projector - Manual (Page 180)

180
3. Select the Reset menu and press Enter .
4. Select Reset Lamp Hours and press Enter .
You see a prompt asking if you want to reset the lamp hours.
5. Select Yes and press Enter .
6. Press Menu or Esc to exit the menus.
Parent topic: Projector Lamp Maintenance
Related tasks
Replacing the Lamp
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.