Epson PowerLite X49 3600-Lumen XGA 3LCD Projector User Manual
Page 201
201
Solutions When Network Alert E-Mails are Not Received
If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's Network menu or in
the network software.
• Set the
Standby Mode
setting to
Communication On
so the network software can monitor the
projector in standby mode. Change the
Port
setting according to your network environment.
Parent topic:
Related references
Projector Setup Settings - ECO Menu
Related tasks
Setting Up Projector Network E-Mail Alerts
Solutions When You Cannot Connect Using Screen Mirroring
If you are unable to connect to the projector using Screen Mirroring (PowerLite 992F/1288), try the
following solutions:
• Make sure
On
is selected as the
Screen Mirroring
setting in the projector's Network menu. Try
turning the setting off and then on again, if necessary.
• Make sure the
Display Name
in the screen mirroring settings does not include "-" or it may not display
correctly on your mobile device.
• Make sure the
Operation Mode
and
Channel
settings in the Network menu are correct for your
mobile environment and try connecting again.
• Make sure no other mobile device is connected to the projector using
No Interruptions
settings in the
Extended
menu
Meeting Mode
settings.
• Make sure the mobile device settings are correct.
• You may not be able to connect immediately after disconnecting from the projector. Wait a while and
try connecting again.
• Restart the mobile device.
• If you have previously connected to the projector using Screen Mirroring, the device may have saved
the previous connection information. Delete the saved information and connect to the projector from
the list of available devices.