Epson PowerLite X49 3600-Lumen XGA 3LCD Projector - Manual (Page 66)

66
1. To access your wireless utility software, access the Desktop and double-click the network icon on
the Windows taskbar.
2. Do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the projector's SSID.
3. Click Connect .
Parent topic: Wireless Network Projection
Selecting Wireless Network Settings on Mac
Before connecting to the projector, select the correct wireless network on your Mac.
1. Click the AirPort icon on the menu bar at the top of the screen.
2. Make sure AirPort is turned on, then do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the projector's SSID.
Parent topic: Wireless Network Projection
Setting Up Wireless Network Security
You can set up security for your projector to use on the wireless network. Set up one of the following
security options to match the settings used on your network:
• WPA2-PSK security (Quick connection mode)
• WPA3-PSK security (Advanced connection mode)
• WPA2/WPA3-PSK security (Advanced connection mode)
• WPA3-EAP security (Advanced connection mode)
• WPA2/WPA3-EAP security (Advanced connection mode)
Note: EAP and PEAP security are only available on PowerLite 992F/1288.
Check with your network administrator for guidance on entering the correct information.
1. Press the Menu button.