Epson PowerLite X49 3600-Lumen XGA 3LCD Projector User Manual
Page 78
78
Note:
If you want to use the Crestron Connected system when the projector is turned off, you need to
adjust the
Standby Mode
settings in the Extended menu.
1.
Press the
Menu
button.
2.
Select the
Network
menu and press
Enter
.
3.
Select
Network Configuration
and press
Enter
.
4.
Select the
Others
menu and press
Enter
.
5.
Set the
Crestron Connected
setting to
On
to allow the projector to be detected.
Note:
Enabling Crestron Connected disables the Message Broadcasting feature in the Epson
Projector Management software.
6.
Turn off the projector, then turn it on again to enable the setting.
Parent topic:
Related tasks
Selecting Wireless Network Settings Manually
Controlling a Networked Projector Using Crestron Connected
Once you have set up your projector to use Crestron Connected, you can control and monitor projection
using a compatible web browser.