Arturia KeyStep - Controller / Sequencer - Manual (Page 27)

3.3.6. Restart Seq / Arp from beginning
It’s possible to repeat the first half of a sequence or arpeggio manually, or perhaps repeat
the first few notes several times, etc., as a spontaneous performance option.
To restart a sequence or an arpeggio pattern from its beginning, hold the Shift button and
press the Play/Pause button.

We will cover the Shift functions that are used during sequence creation in the next chapter.
3.4. Shift function chart
Here’s a list of all Shift button features:
Combination Effect
Shift + Key (1
to 16)
Select user channel and reset Kbd Play Midi channel
Shift + Key
(17 to 21)
Select a global gate value
Shift + Key
(22 to 32)
Select a swing value
Shift + Oct
Minus
Enter Transpose mode
Shift + Oct
Plus
Enter Kbd Play mode
Shift + Oct
Plus + Key
Selects Midi channel for Kbd play mode
Shift + HOLD Enter/Exit chord mode
Shift + HOLD
+ Keys
Enter new notes for the chord mode (Hold button blinks quickly)
Shift + REC Enter Record-append mode
Shift + STOP Clear last step of the sequence (only in Seq mode)
Shift + Play Restart the playback to the first step of the Seq/Arp
Shift + Seq/
Arp or Time
Div
The new position of the encoder will become active when the Shift button is released
Shift + Rate
The BPM of an Arp or Seq is adjusted in quantized 1.00 BPM increments (up to +/- 10 BPM)
around the Rate knob's "12:00" position. Note that KeyStep sync must be set to internal to do
this.
Arturia - User Manual KeyStep - Shift Functions 22