Arturia KeyStep - Controller / Sequencer - Manual (Page 68)

8.10.2. MIDI Controller settings
Here’s a quick reference chart for those parameters:
Parameter Range/Values Description/Function
User Channel 1-16 Keyboard MIDI Channel
MIDI Input Channel 1-16, User USB/MIDI CV channel when Seq/Arp are stopped
MIDI Thru Off, On Patch MIDI In to Out
Sustain Pedal Mode Gate, Toggle Momentary or Latching
Sustain Pedal Function Hold, Sustain, Both Act as Hold button or not
Hold Switch Mode Gate, Toggle Momentary or Latching
Hold Switch Function Hold, Sustain, Both Act as Sus. Pedal or not
Sustain Message MIDI Ch 1-16, User Fixed/follow User channel
Sustain Message Range Low 0-127 Set minimum range
Sustain Message Range High 0-127 Set maximum range
Sustain Message CC 0-127 Assign MIDI CC #
Mod strip MIDI Ch 1-16, User Fixed/follow User channel
Mod strip CC 0-127 Assign MIDI CC #
Pitch Bend MIDI Ch 1-16, User Fixed/follow User channel
Velocity curve Log, Lin, AntiLog Personalized response
Aftertouch curve Log, Lin, AntiLog Personalized response
Now let’s go through the parameters one at a time.
8.10.2.1. User Channel
This sets the keyboard MIDI Channel. It’s the same parameter found on the keyboard that
is set by holding Shift and pressing a key.
63 Arturia - User Manual KeyStep - MIDI Control Center