Pitch bend range, Transport settings, Miscellaneous settings – Arturia KeyStep - Controller / Sequencer User Manual
Page 78
8.10.4.7. Pitch Bend Range
This parameter sets the maximum about the Pitch CV output will vary when the Pitch strip
is used.
8.10.5. Transport settings
First a quick summary of the Transport settings, then the chart:
Play/Pause:
the alternate setting is “Reset”. This would allow you to perform ‘stutter edits’ on
your sequences.
Stop/Record/Play:
You can define the MIDI channel and CC number for each of the three
main Transport commands independently. All three must transmit the same type of MIDI
information, though: MIDI CC, MMC, or both.
Parameter
Range/Values
Description/Function
Play/Pause
Pause, Reset
Pause or ‘stutter’ sequence
Transport Mode
MIDI CC, MMC, Both
Covers most devices
Stop Channel
1-16, user
Fixed channel or linked to keyboard channel
Record Channel
1-16, user
Fixed channel or linked to keyboard channel
Play Channel
1-16, user
Fixed channel or linked to keyboard channel
Stop CC
0-127
Full MIDI range
Rec CC
0-127
Full MIDI range
Play CC
0-127
Full MIDI range
8.10.6. Miscellaneous settings
LED Brightness:
This parameter adjusts the brightness level of the KeyStep LEDs.
73
Arturia - User Manual KeyStep - MIDI Control Center