Nikon D780 DSLR Camera (Body Only) - Manual (Page 736)

690 Menu Guide > B The Setup Menu
• Regardless of the option selected for [ Link mode ], signals
from paired wireless remote controllers will always be
received by the WR-R10. Users of the WR-1 wireless remote
controller will need to select pairing as the WR-1 link mode.
[ PIN ]
Communication is shared
among all devices with the
same four-digit PIN. You can
enter any four-digit PIN of your
choice.
• Press 4 or 2 to highlight
digits and press 1 or 3 to
change. Press J to enter and display the selected PIN.
• This option is a good choice for photography featuring
a large number of remote devices.
• If there are multiple cameras present that share the
same PIN, the flash units will be under the sole control
of the camera that connects first (the LEDs on the
WR-R10 units connected to the affected cameras will
blink).
Option Description