HP ENVY Inspire 7255e All-in-One Color Printer with Free HP+ Upgrade Eligibility - Manual (Page 19)

1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, touch Wireless
, and then touch Settings .
2. Touch Wireless Settings.
3. Touch the toggle button next to Wireless to switch it on or off.
NOTE: If the printer has never been configured to connect to a wireless network before, turning on the
wireless capability will automatically start the Wireless Setup Wizard.
To restore the printer to the original network settings
1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, and then touch Setup
.
2. Touch Network Setup.
3. Touch Restore Network Settings.
A message appears stating that the network defaults will be restored.
4. Touch Yes.
5. Print the network configuration page and verify that the network settings have been reset.
NOTE: In order to get the list of detected wireless networks in the area, the wireless radio on the printer
should be turned on. If it is off, the list is not displayed.
TIP: You can visit the HP online support website at hp.com/support for information and utilities that can
help you correct many common printer problems.
Use HP Print and Scan Doctor to automatically diagnose and resolve issues. If you are using Windows 10, you
can run the HP Print and Scan Doctor from HP Smart.
Change the connection type
This topic describes how to change the way to connect your printer.
USB to a wireless connection
Windows 10/macOS
1. Unplug the USB cable from the printer.
2. Make sure your computer or mobile device is connected to your Wi-Fi network. On your mobile device,
turn on Bluetooth and location services.
3. If your printer Wi-Fi was previously turned off, make sure to turn it on. For more information about
wireless status, see Turn on or off the wireless capability of the printer .
4. If the printer is no longer in wireless setup mode, restore the printer network settings. For more
information, see To restore the printer to the original network settings .
5. Open the HP Smart app on your computer or mobile device. For more information, see Use the HP Smart
app to print, scan, and manage .
To restore the printer to the original network settings 11