HP ENVY Inspire 7255e All-in-One Color Printer with Free HP+ Upgrade Eligibility - Manual (Page 34)

Update the printer
HP periodically releases firmware updates to enhance product functionality and fix issues. By default, if the
printer is connected to the Internet, the printer automatically checks for updates at regular intervals. You can
change the default setting for automatic updates or manually check for updates immediately.
Dynamic security enabled printers
This printer is intended to work only with cartridges that have new or reused HP electronic circuitry. Reused
HP electronic circuitry enables the use of reused, remanufactured, and refilled cartridges.
The printer uses dynamic security measures to block cartridges using modified or non-HP circuitry. Periodic
firmware updates delivered over the internet will maintain the effectiveness of the dynamic security measures
and block cartridges that previously worked.
Updates can improve, enhance, or extend the printer’s functionality and features, protect against security
threats, and serve other purposes, but these updates can also block cartridges using modified or non-HP
electronic circuitry from working in the printer, including cartridges that work today. Unless you are enrolled in
certain HP programs such as Instant Ink or use other services that require automatic online firmware updates,
most HP printers can be configured to receive updates either automatically or with a notification that allows
you to choose whether to update or not. For more information on dynamic security and how to configure
online firmware updates, please go to www.hp.com/learn/ds .
To update the printer using the printer control panel
1. From the top of the screen, touch or swipe down the tab to open the Dashboard, touch Setup .
2. Touch Printer Maintenance.
3. Touch Update the Printer.
4. Touch Check for Printer Updates Now.
To enable the printer to automatically check for updates
NOTE: The default setting of Auto Update is On.
1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, and then touch Setup
.
2. Touch Printer Maintenance.
3. Touch Update the Printer.
4. Touch Printer Update Options.
5. Select Install Automatically (Recommended), Alert When Available or Do Not Check.
To update the printer using the embedded web server (EWS)
1. Open the EWS. For more information, see To access and use EWS .
2. Click the Tools tab.
3. In the Printer Updates section, click Firmware Updates, and then follow the onscreen instructions.
26 Chapter 4 Configure your printer