Canon Mk1500 Cable and Wire Marker Printer - Manual (Page 10)

6
Always keep the AC plug clean
Clean the AC adapter plug periodically. If dust, dirt, soot, etc., is
allowed to accumulate on the plug, the dust could absorb moisture,
creating an insulation fault that could cause a
fi re.
Do not continue to use the unit if an abnormality develops
If the unit begins to smoke or emit an unusual odor, turn the power
switch off immediately, unplug the AC adapter plug from the power
outlet, and then contact your nearest dealer. Continuing to use the unit
after an abnormal condition has developed could result in
fi re or electric
shock.
Do not connect to a multi-outlet adapter or extension cord
Do not connect this unit to a multi-outlet adapter or extension cord.
Doing so could result in
fi re or electric shock.
Do not power on with the power cord tied. It can cause fi re or electrical
shock.
Do not use sprays, etc., in the vicinity of the unit
Do not use fl ammable sprays in the vicinity of this unit. The spray
could come into contact with internal components of the unit, resulting
in a
fi re or electric shock.
Do not clean with paint thinner, etc.
If it is necessary to wipe dirt off the unit, use gauze that has been
dampened with water and then thoroughly wrung out. Never use
fl ammable solvents such as alcohol, benzene or paint thinner. The
solvents could come into contact with internal electric components and
cause a
fi re or electric shock.
Turn the unit off for cleaning
Before cleaning the unit, turn the power off and unplug the AC adapter
from the power outlet. Injury could result if the power switch is
inadvertently left in the “ON” position and the unit is put into operation.