Canon Mk1500 Cable and Wire Marker Printer User Manual
Page 84
80
5
Press
[
►
] four times; “Right 1.0mm” is displayed.
Pressing [
►
] increases the value in steps of 0.25mm.
Press [
◄
] to move the printing start position to the left.
•
6
Press
[Enter].
The display returns to the character input display. The printing
start position has now been shifted 1mm to the right. Next, move
the vertical position down 0.5mm.
•
7
Press
[Option].
The Options display appears.
•
8
Press
[
◄
] or [
►
] to select “1:Adjustment”, and press Adjustment
mode [Enter].
The Adjustments display appears.
•
9
Press
[
◄
] or [
►
] to select “2:Height”, and press [Enter].
The Select media display appears.
The vertical position can be set for each printing media
•
10
Press
[
◄
] or [
►
] to select “4:Label”, and press [Enter].
The Label size display appears.
•
11
Press
[
◄
] or [
►
] to select “3:12mm”, and then press [Enter].
The setting adjustment display appears.
When the print media is a 4mm I.D. strip, and wrap araund tape the size selection is
skipped.
•
12
Press
[
▼
] two times; “Down 0.5mm” is displayed.
Pressing [
▼
] increases the value in steps of 0.25mm.
Press [
▲
] to move the vertical position up.
•
13
Press
[Enter].
The display returns to the character input display. The vertical
position has now been shifted down by 0.5mm.
•