Part 4 – Canon Mk1500 Cable and Wire Marker Printer User Manual
Page 75
71
Advanced Operations
Part 4
8
Press
[
▼
] or [
►
].
If you press [Enter] instead of [
▼
] or [
►
], a new page is created.
9
Input
“24V”.
10
Press [Print/Print Option].
The Select media display appears.
•
11
Press
[
◄
] or [
►
] to select “4:Label”, and then press Label
size [Enter].
The label tape size (width) selection display appears.
•
12
Press
[
◄
] or [
►
] to select “3:12mm”, and then press Print
[Enter].
The sets to print display appears.
•
13
Press
[Enter].
14
Confirm the location of the leading end of the loaded label
tape, press [
◄
] or [
►
] to select the input side, and press
[Enter].
If the leading end of the loaded label tape is at the transport roller 2, select [IN], and if
its at the cutter side, select [OUT].
Canceling printing
If you press [Cancel], the message “Aborting print” appears and printing is aborted.
In this case, label tape that is currently being printed is cut and then ejected.
Printing might not be performed correctly in some orientations, depending on the settings
for the media size and the character size.