Loading character data – Canon Mk1500 Cable and Wire Marker Printer User Manual
Page 70
66
Loading character data
There are two methods for retrieving character data that has been stored in
fi
les: “New” and “Add”.
Loading with “New”
When character data (
fi
le) is retrieved, the character data that is currently displayed is deleted and is replaced
with the retrieved character data.
Loading with “Add”
When the character data (
fi
le) is loaded, it is added following the last page of the data that is currently
displayed.
ex. Add the text saved in the file named “Switch 1” to the currently displayed text.
1
Press
[Regist.].
The file registration checking display appears.
•
2
Press
[
◄
] or [
►
] to select “2:Find”, and then press Find mode
[Enter].
3
Press
[
◄
] or [
►
] to select “2:Add”, and then press [Enter].
The Choose file display appears.
If no
fi
les have been saved, the message “No
fi
les.” appears, and then the display returns
to the character input display.
“*” appears next to the names of
fi
les that cannot be loaded because of their data size.
•
4
Press
[
◄
] or [
►
] to select “Switch 1”, and then press [Enter].
The “Add” loading confirmation display appears.
•
5
Press
[Enter].
After the display at right appears, the last page of the loaded
character data is displayed.
•