Canon Mk1500 Cable and Wire Marker Printer - Manual (Page 85)

81
Advanced Operations Part 4
Adjusting the printing density
Printing may be too dark or too light in some cases, depending on the environment in which the printer is used
and the characteristics of the print media. In such cases, adjust the printing density. The printing density can be
adjusted to
fi ve levels.
ex. Printing on a tube is too light, so increase the printing density.
1
Press [Option].
The setting display appears. •
2
Press [ ◄ ] or [ ► ] to select “2:Print option”, and then press [Enter].
The setting display appears. •
3
Press [ ◄ ] or [ ► ] to select “1:Density”, and then press [Enter].
The Print density selection display appears. •
4
Press [ ► ] two times.
Print density “1” is the lightest print density, and print density “5”
is the darkest print density.
Press [ ◄ ] to make the printing density lighter.
•
5
Press [Enter].
The display returns to the character input display. Maximum
density is now selected. •