Canon Mk1500 Cable and Wire Marker Printer - Manual (Page 12)

8
CAUTION
Do not place the unit on an unstable surface
Do not place the unit on an unstable surface or a surface that is subject
to vibration. The unit could fall or tip over and cause injury.
Do not place the unit on a carpet
Do not place the unit directly on a rug or carpet. Fibers and dust from
the carpet can get inside of the unit and cause a
fi re.
Do not insert foreign objects inside the unit
Do not drop or insert foreign objects such as clips or staples in the
opening for the AC adaptor, cutter section, or inside the printer.
Otherwise it may cause
fi re, electrical shock, machine failure, or injury.
Protect the unit from humidity and dust
Do not operate or store the unit in a hot and humid environment, in a
dusty environment, in an area exposed to direct sunlight, or near an
open
fl ame. Doing so could result in fi re or electric shock.
Be sure to observe the storage and operating environment condition.
Operating environment: 15-32.5°C, RH 10-85%
Storage environment: 5-35°C, RH 10-90%
Do not place heavy objects or metal objects on the unit
Do not place heavy objects on the unit. Doing so could damage the
unit.
Do not place metal objects such as accessories or containers such as cup
containing water or
fl uid. Touching the electrical parts inside the printer
can cause short circuit and may result in fi re or electrical shock.
Handle the AC adapter carefully
When unplugging the power cord from an outlet, grasp the plug itself;
do not pull on the cord. Pulling on the cord could damage the cord,
which could result in
fi re or electric shock. Furthermore, always be
sure to turn the power switch on the unit “OFF” before unplugging or
plugging in the AC adapter.