Canon imagePROGRAF GP-4000 User Manual
Page 132
11.
Tap
OK
.
11.
After the roll is rewound, it stops automatically.
Manual (for paper of which the leading edge rubs the print head)
Note
• Once the following step has been performed, the procedure can be started from step 8 the next time.
•
Printing the second and subsequent times
Printing after replacing with the same type of paper
1.
Tap paper settings display area on Home screen of touch screen.
1.
Note
• If the Home screen does not appear, tap the
HOME
button.
•
2.
Tap paper feed slot where roll paper for which you want to set cutting method is loaded.
2.
3.
Tap
Paper settings
.
3.
4.
Tap
Advanced
.
4.
5.
Tap
Cutting mode
.
5.
6.
Tap
User cut
.
6.
7.
When
Do you want to set to detect the leading edge of the paper?
is displayed, select
7.
Do not detect
.
Note
• If you set the detection of paper leading edge to
Do not detect
, a margin of about 4.0 inches
•
(10 cm) is created at the paper leading edge when printing starts.
132