Canon imagePROGRAF GP-4000 - Manual (Page 531)

Set a Custom Size Roll Width
By specifying the roll paper width with a value, you can use roll paper with a width that cannot be selected in
Roll Paper Width .
The procedure for setting custom size roll width is described below.
1. Open the printer driver setup window 1.
2. Select the paper source 2.
From the Paper Source list on the Page Setup tab, choose the best option for your purposes between
Roll Paper (Auto) , Roll 1 and Roll 2 .
3. Select paper roll width 3.
In Roll Paper Width , select User-defined1 (XXXX) / User-defined2 (XXXX) .
The Custom Size Settings dialog box opens.
4. Set paper roll width 4.
Specify Units , enter the roll width you want to use, and then click OK .
531