Switching the paper source to match the purpose – Canon imagePROGRAF GP-4000 User Manual
Page 569
Switching the Paper Source to Match the Purpose
This printer has three paper sources: Roll 1, Roll 2, and Cut Sheet.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
1.
Open the
1.
2.
Select the media type
2.
Select the type of paper loaded in the printer from the
Media Type
list on the
Main
tab.
3.
Select the paper source
3.
From the
Paper Source
list on the
Page Setup
tab, select the paper source that matches your purpose.
Roll Paper (Auto)
Feeds paper by automatically switching between Roll 1 and Roll 2 according to the print job.
Roll 1
Feeds paper from Roll 1.
Roll 2
Feeds paper from Roll 2.
Cut Sheet
Feeds paper using the cut paper.
Important
• The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit
option settings.
4.
Complete the setup
4.
569