Canon imagePROGRAF GP-4000 - Manual (Page 234)

Auto maintenance settings
Select this setting item from Printer settings .
Important
• The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
• Auto nozzle check •
Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic
nozzle checking.
• Nozzle check error display •
Enables/Disables displaying the nozzle check error.
• System Cleaning frequency •
Specifies the frequency of automatic system cleaning.
Note
• To maintain print quality, we recommend you select Short if you use the printer at a higher place.
• Print pattern after new head •
Selects whether you print an adjustment pattern after replacing the Print head.
234