HP MFP M528f Monochrome Laser Printer - Manual (Page 144)

Menu item Description
Dialing Mode The Dialing Mode setting sets the type of dialing that is used: either tone (touch-tone
phones) or pulse (rotary-dial phones).
Dialing Prefix The Dialing Prefix setting allows you to enter a prefix number (such as a "9" to access an
outside line) when dialing. This prefix number is automatically added to all phone numbers
when dialed.
Detect dial tone The Detect dial tone setting determines whether the fax checks for a dial tone before
sending a fax.
General fax send settings
1. From the Home screen on the printer control panel, navigate to the Settings application, and then select
the Settings icon.
2. Open the following menus:
● Fax
● Fax Send Settings
● General Fax Send Settings
Configure any of the following settings, and then select Done :
Menu item Description
Fax Number Confirmation When the Fax Number Confirmation feature is enabled, the fax number must be entered
twice to ensure that it was entered correctly. The feature is disabled by default.
PC Fax Send Use the PC Fax Send feature to send faxes from a PC. This feature is enabled by default.
Error Correction Mode Normally, the fax accessory monitors the signals on the telephone line while it is sending or
receiving a fax. If the fax accessory detects an error during the transmission and the Error
Correction Mode setting is on, the fax accessory can request that the error portion of the
fax be sent again.
The Error Correction Mode feature is enabled by default. You should turn it off only if you
are having trouble sending or receiving a fax and if you are willing to accept the errors in the
transmission and a probable quality reduction in the image. Turning off the setting might be
useful when you are trying to send a fax overseas or receive one from overseas, or if you
are using a satellite telephone connection.
NOTE: Some VoIP providers might suggest turning off the Error Correction Mode setting.
However, this is not usually necessary.
Fax Header Use the Fax Header feature to control whether the header is appended to the top, and
content is shifted down, or if the header is overlaid on top of the previous header.
Fax receive settings
1. From the Home screen on the printer control panel, navigate to the Settings application, and then select
the Settings icon.
2. Open the following menus:
130 Chapter 7 Fax ENWW