HP MFP M528f Monochrome Laser Printer - Manual (Page 100)

Step five: Set up Send to Email to use Office 365 Outlook (optional)
● Introduction
● Configure the outgoing email server (SMTP) to send an email from an Office 365 Outlook account
Introduction
Microsoft Office 365 Outlook is a cloud-based email system provided by Microsoft which uses Microsoft's Simple
Mail Transfer Protocol (SMTP) server to send or receive emails. Complete the following to enable the printer to
send an email with an Office 365 Outlook account from the control panel.
NOTE: You must have an email address account with Office 365 Outlook to configure the settings in the EWS.
Configure the outgoing email server (SMTP) to send an email from an Office 365 Outlook account
1. Using the EWS top navigation tabs, click Networking.
2. In the left navigation pane, click TCP/IP Settings.
3. In the TCP/IP Settings area, click the Network Identification tab.
4. If DNS is required on the network, in the TCP/IP Domain Suffix area, verify that the DNS suffix for the email
client being used is listed. DNS suffixes have this format: companyname.com , Gmail.com, etc.
NOTE: If the Domain Name suffix is not set up, use the IP address.
5. Click Apply.
6. Click the Scan/Digital Send tab.
7. On the left navigation pane, click Email Setup.
86 Chapter 6 Scan ENWW