Huawei DR814Q - Manual (Page 13)

User Manual
Aolynk DR814Q ADSL2+ Broadband Router
3 Getting Started
8
3
Getting Started
s of Web configuration pages as the way to manage it. You
can configure the DR814Q as needed. This chapter guides you to be familiar with the
3.1 Prer
ugh its built-in Web pages, you must configure your PC
I. S stem
or 10/100Base-T/TX) or a USB port
t Internet Explorer 5.5, Netscape 6.0 or later)
yed
II.
ccessing the configuration page. The default IP address of the
rt is 192.168.1.1. Refer to section 7 “Appendix - TCP/IP Protocol”.
III.
e the proxy
s] window.
2) Select the [Connections] tab and click <LAN settings…>.
Make sure the Use a proxy server option is not selected.
3.2 Log
Run your Web browser and enter http://192.168.1.1 in the address bar. The login
dialog box appears as shown in Figure 3-1.
The DR814Q offers a serie
Web configuration pages.
equisite Tasks for Configuration
To configure the DR814Q thro
as the following.
y requirements
z An Ethernet NIC (10Base-T
z A Web browser (Microsof
z TCP/IP protocol emplo
IP address of your PC
You must assign an IP address to your PC to make it in the same network segment as
the DR814Q before a
DR814Q Ethernet po
No proxy server
If your PC uses the proxy server to access the Internet, you must disabl
service.
1) Choose [Tool/Internet options] to open the [Internet option
3)
in